- Description
- Reviews
- FAQs
- Description
8 Fiber Port &1 UTP lan port Fiber optic ethernet switch ，Fiber Media Converter
Multi-gigabit optical aggregation series is my company based independent software research and development from a fiber aggregation switches, which have 8 * 1000M optical ports and 2 * 10/100 / 1000M adaptive Ethernet electrical interface. , Transmission distance: Multimode: 550m; Single-mode: 20/40/80 / 120KM (optional).
Multi-gigabit optical convergence convergent series fiber optic switch is a photoelectric signal switch Gigabit Ethernet (Gigabit Fiber Switch) of electrical and optical signals multiplexed centralized exchange used, it meets IEEE802.3z / A standard, MTBF: > 70,000 hours
□ 8 * 1000Base-X optical ports and 2 * 1000Base-T electrical interface composition;
□ Standard: IEEE802.3z / A;
□ Ethernet electrical interface supports full-duplex and half-duplex network communication, with auto-negotiation capability;
□ Ethernet port supports AUTO-MDIX (crossover cable and straight-line adaptive);
□ High backplane bandwidth, two-story full wire-speed packet forwarding rate of exchange;
□ can detect when the optical signal is lost for the end of the fiber optic equipment down or nowhere, and through the LED indicates alarm;
□ light switch electrical ports are 10/100 / 1000M auto-sensing ports, the device according to the connected electrical outlet hear each other to set their own rate highest rate;
□ unrepeated transmission distance of up to 2∽120 kilometers;
□ Optical interface Optional: single fiber / dual fiber, single-mode / multi-mode;
□ Interface: SC / FC / ST / LC LC (SFP) (default);
□ Power supply: External power supply DC5V; 3A, built-in power AC220V;
Ethernet port
Quantity: 1
Type: RJ45,10 / 100 / 1000M,
Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptive
Protocol: IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses can be learned
Physical interface: RJ45 seat support (cross / straight-line adaptive) Auto-MDIX
Optical Interface
Quantity: 8
Type: SFP, 1000M
Wavelength: singlemode 1310nm / 1550nm
Multimode 850nm / 1310nm (optional)
Fiber Count: single fiber / dual-fiber (optional)
Transmission power: -9dBm∽-5dBm
Transmission Length: singlemode 20/40/60/80/100 / 120km
Multimode 2km (optional)
Receiving sensitivity: Better than -36dBm
Connector: SC / FC / LC, default: SFP
Mechanical properties
Housing: IP30 protection grade, metal
Installation: Desktop, wall-mounted
Industry Standard
EMI: FCC Part 15. CISPR (EN55022) class A
Industry: IEC6100-6-2
Railway: EN50155.EN50121-4
Transportation: NEMA TS-2
Coal: GB / T3836.1 / 2/3/4
Machinery: IEC68-2-6 / 27/32
working environment
Operating temperature: 0 - 50 ℃
Storage temperature: -20 - 70 ℃
Relative humidity: 5 to 90% (non-condensing)
power supply
Power: DC5V; 3A (external)
AC220V (built-in)
- Customers Reviews
-
(0)
(0)
(0)
(0)
(0)
* Delivery Time.
We need 1-2 days to process your order before shipping. There are two shipping methoed.
Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.
Slow Delivery: The delivery time for US, European countries the delivery will take 7-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 2 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.
